12 February 2021 at 6:39 PM
#5765
Geoff Pinch
Participant
It’s a problem Morris Minor owners solve and I have used a kit for a Moggy similar to this one on eBay:
Having fitted it in future I’d replicate using quality components. Getting a good seal on the master cylinder cap and the new fitting is important but I’m sure there are elegant solutions that would connect to the pipe to the master cylinder cap without the plastic pipe heading straight up. On the Morris the floor was too close to allow a sweep for the plastic pipe and I used plastic right angle joiner onto a short piece of pipe to make it work better.